<p id="yq94g"><strong id="yq94g"><xmp id="yq94g"></xmp></strong></p>
    <pre id="yq94g"><strong id="yq94g"><xmp id="yq94g"></xmp></strong></pre>
        產品中心 Products center

        首頁 > 產品中心 > 其它 > EEPROM

        AT24C02

        Device Selection Tble

         

        Part Number

        VCC Range

        Max. Clock Frequency

        AT24C02

        1.8-5.5

        400KHz

        Note 1: 100 KHz for Vcc=1.8V


        Features

        • Single supply with operation down to 1.8v

        • Low-power CMOS technology:

        • 1 mA active current, typical

        • 1 μA standby current, typical(l-temp)

        • Organized as 1 block of 256 bytes (1×256×8)

        • 2-wire serial interface bus, l2CTM compatible

        • Schmitt Trigger inputs for noise suppression

        • Output slope control to eliminate ground bounce

        • 400 kHz (24C02) compatibility

        • Self-timed write cycle (including auto-erase)

        • Page write buffer for up to 8 bytes

        • Hardware write-protect for entire memory

        • Can be operated as a serial ROM

        • Factory programming (QTP) available

        • ESD protection>2000V

        • 1,000,000 erase/write cycles

        • Data retention>100 years

        • 8-lead PDIP, SOIC ,TSSOP packages

        • Pb-free finish available


        Description

        The 24C02 is a 2Kbit Electrically Erasable PROM, The device is organized as one block of 256 x 8-bit memory with a 2-wire serial interface. Low-voltage design permits operation down to1.8V, with standby and active currents of only 1μA and 1mA, respectively. The 24C02 also has a page write capability for up to 8 bytes of data. The 24C02 is available in the standard 8-pin PDIP, surface mount SOIC, TSSOP package.

        1.png

        聯系我們Content us

        在線客服

        深圳市華芯邦科技有限公司(總部)

        郵箱:rubyli@hotchip.com.cn

        電話:0755-88844476

        地址:深圳市龍華區民治街道民塘路328號龍華區數字創新中心B座25樓

        hx-wechat 華芯邦微信公眾號